Charles Ross Products

  1. Skid Mounted Static Mixing Systems 3/5/2009

    Charles Ross & Son Company, the leader in specialty mixing and dispersion equipment, is now offering complete skid mounted static mixing systems

  2. Double Cone Blenders 2/25/2009

    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending.

  3. Double Cone Blender 2/24/2009
    Double Cone Blenders are most often used for the intimate dry blending of free flowing solids. The solids being blended in these units can vary in bulk density and in percentage of the total mixture. Materials being blended are constantly being intermixed as the Double Cone rotates. Normal cycle times are typically in the range of 10 minutes, however they can be less depending on the difficulty of blending. Ross Double Cone Blenders are in stock in 5, 10 and 15 cu.ft. capacity. A full range of sizes from 1/2 to 80 cu. ft working capacity is available. Each is constructed of type 316-stainless steel and is internally polished to a 240 grit sanitary finish. The exterior is polished to an easily cleaned 150-grit finish. All Ross Double Cone Blenders are supplied with Intensifier bars to permit delumping and deagglomeration as needed. Discharge is accomplished through a manually operated Butterfly valve. The valve is positioned 24” from the floor when in the bottom position. All units are provided with appropriate safety railings and appropriately interlocked safety interlocks. Stop-Start and E-Stop Pushbuttons are included with all blenders.
  4. X-Series High Shear Mixer 1/23/2007
    The X-Series High Shear Mixer being offered by Charles Ross and Son Company is now being offered with several new optional design features.
  5. Vacuum Drying System 9/13/2006
    Complete Vacuum Drying Systems are available to meet the needs of each application. The systems typically include a mixer/blender, filter condenser, vacuum pump, and a condensate receiving vessel
  6. Ross Introduces New Cylindrical Vacuum Dryers 9/10/2006
    Charles Ross & Son Company has recently introduced a new line of Cylindrical Dryers for the chemical process industries.
  7. Paddle Blenders 5/16/2006

    Paddle Blenders consist of a U-shaped horizontal trough and a fabricated paddle agitator

  8. Vertical Process Tank 11/4/2004
    Stainless Steel Tanks - Vertical process tank 8 ft.x 8 ft. and having a capacity of 3,700 gallons.
  9. Stainless ASME Code Vessel 11/4/2004
    Vessel is designed for 15 psig and fabricated and stamped in accordance with ASME Section VIII, Division 1 - Six (6) double turns of 3"-sch half-pipe for heating
  10. Portable Mix Vessel 8/6/2004

    Special 100 gallon capacity sanitary mix vessel constructed of type 316 stainless steel