Self-Contained 42-Inch Fluid Bed Dryer System

With on-site connections to a power source, bag house and material inlet/outlet, the system is ready to run. At less than half the size and weight of rectangular fluid bed processors of equivalent capacity, the circular fluid bed unit allows all primary system components to be consolidated on a shippable frame for the first time, says Henry Alamzad, VP Sales and Marketing. In addition to dryer-oriented components, the system incorporates an optional, Centrisifter centrifugal separator above the fluid bed unit for continuous de-lumping of incoming material. Inherent strength of the circular processor eliminates the need for heavy-gauge walls and cross braces otherwise required to withstand continuous vibration, allowing vibratory motors to be down-sized. The circular unit also requires only one air inlet and outlet and has fewer weld seams, reducing overall size and construction cost, especially when finished to 3A, FDA, USDA and BISSC sanitary standards.

N/A, 67-71 East Willow Street, Millburn, NJ 07041-1416. Tel: 973-467-8140; Fax: 973-258-9533.