Model 475 Belt Scale
Source: Merrick Industries, Inc.
The Model 475 Belt Scale is designed to meet or exceed the accuracy requirements of the National Institute of Standards and Technology (NIST) Handbook 44.
The Model 475 Belt Scale is designed to meet or exceed the accuracy requirements of the National Institute of Standards and Technology (NIST) Handbook 44.
Maintenance-free design. Parallelogram loading frame eliminates all bearings, pivots, and friction points.EASILY INSTALLED
Adjustable suspension bushings, adjustable idler arms, and roller alignment trimming screws permit quick, accurate weigh platform alignment without the need for shims or special tools. ACCURATE
Advanced alignment and innovative mechanical features permit greater accuracy with fewer idlers. REPEATABLE
The innovative parallelogram suspension is not influenced by off-center belt loading resulting in unsurpassed weighing stability. EXPERIENCE
Merrick is the inventor and recognized pioneer of belt scale systems since 1908. FLEXIBLE
Purchase the 475 design with confidence. If your accuracy requirements increase in the future, simply add another weighing unit in series with the existing unit (four maximum) to increase your weighing accuracy. BONUS BENEFIT!
Single or dual module 475 installations are components of an NTEP approved scale and can be upgraded to NTEP compliance by adding weigh modules in the future (minimum three modules required for NTEP compliance). PATENTED DESIGN
One Design for Single or Multi-Idler Installations.
A certificate of conformance, Number 92-196, was issued under the National Type Evaluation Program (NTEP) of the National Conference of Weights and Measures. The certificate is for capacities of 14.5-145 lb/ft. at belt speeds of 100-800 ft/min. with weighbridge lengths of 9-20 feet.
NTEP APPROVED 475 BELT SCALE
BELT WIDTHS UP TO 84"
CAPACITIES UP TO 11,000 TPH
- CERTIFIABLE DESIGN
- RELIABLE
Maintenance-free design. Parallelogram loading frame eliminates all bearings, pivots, and friction points.
Adjustable suspension bushings, adjustable idler arms, and roller alignment trimming screws permit quick, accurate weigh platform alignment without the need for shims or special tools.
Advanced alignment and innovative mechanical features permit greater accuracy with fewer idlers.
The innovative parallelogram suspension is not influenced by off-center belt loading resulting in unsurpassed weighing stability.
Merrick is the inventor and recognized pioneer of belt scale systems since 1908.
Purchase the 475 design with confidence. If your accuracy requirements increase in the future, simply add another weighing unit in series with the existing unit (four maximum) to increase your weighing accuracy.
Single or dual module 475 installations are components of an NTEP approved scale and can be upgraded to NTEP compliance by adding weigh modules in the future (minimum three modules required for NTEP compliance).
One Design for Single or Multi-Idler Installations.
Merrick Industries, Inc., 10 Arthur Drive, Lynn Haven, FL 32444. Tel: 850-265-3611; Fax: 850-265-9768.
This website uses cookies to ensure you get the best experience on our website. Learn more