Analytical and Laboratory Benchtop Instruments
Anton Paar produces high-end measuring and laboratory instruments for industry and research. It is the world leader in the measurement of density, concentration and CO2 and in the field of rheometry. Other areas of specialty are: Petroleum testing, microwave synthesis, viscometry, polarimetry, refractometry, X-ray scattering, sample preparation and surface characterization.
DMA 35: Portable Density Meter
The DMA 35 portable density meter measures the density and concentration of your sample and is characterized by the highest level of user friendliness. Its robust and lightweight design enables the use in numerous fields of application and its on-site operation in a wide range of work environments.
CO2O2 Measuring Module For Beverages CarboQC ME Plus Option O2
This measuring module with an optochemical sensor is used in the laboratory for the determination of dissolved oxygen in beverages. It is designed to work with CarboQC ME and PBA-S Generation M, and PBA-SI/PBA-B Generation M.
Beverage Carbonation Measuring Module CarboQC ME
CarboQC ME determines the amount of CO2 and eliminates the influence of dissolved air in carbonated liquids. It is used in Anton Paar measuring systems of the Generation M, for example a PBA-S Generation M.
Turbidity Measuring Module HazeQC ME
HazeQC ME is a module for Anton Paar laboratory measuring instruments and analysis as Aloclyzer Plus or Generation M Systems. It is used to measure the turbidity of all kinds of liquids, especially beer and beer mixtures.
Beverage Package Sampler Xsample 510
The Package Sampler Xsample 510 enables the fully automatic filling and cleaning of modular Anton Paar PBA measuring systems. Whether from glass bottles, PET bottles or cans, Xsample 510 fills your samples into measuring chambers directly from their closed packages. Sample preparation work such as thermostatting, degassing and filtration is not required, since there is no loss of dissolved gases such as CO2 during filling.
DMA 500 Density & Concentration Meter
Density measurement of liquids and gases is a proven method for analysis and quality control in numerous industries. It enables you to reliably determine product-specific parameters and concentrations of binary mixtures.
MCR Modular Compact Rheometer Series
The new MCR rheometers are based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists.
MCP 300 Modular Circular Polarimeter
The MCP 300 modular circular polarimeter uses the latest technology and ensures high measuring accuracy. It is easy to use. The combination of quality, robust design and modern data management at an attractive price makes it the instrument of choice.
Modular Compact Polarimeter
Anton Paar’s Modular Compact Polarimeters MCP 100 and MCP 150 help you to reach all required targets automatically with the latest technology – at a truly budget-friendly price and with a small size. MCP 100/150 is the right choice for pharmaceutical applications, universities or the flavor and fragrance industry.
Modular Circular Polarimeter: MCP 200
The MCP 200 series of polarimeters provides accurate measurements of the optical rotation of liquids at an economic price. It utilizes the latest technology to ensure high measuring accuracy with great ease-of-use.
HPA-S - High Pressure Asher
Anton Paar has developed and produced sample preparation instruments to the highest standards for over 30 years. In 1973, the introduction of the "VAO", the world’s first automatic wet decomposition device, marked the beginning of a successful cooperation between Anton Paar GmbH and Prof. Günter Knapp at the University of Technology in Graz. Since then, professional, high-performance instruments have been developed for plasma ashing, oxygen combustion, high pressure digestion and for microwave-supported decomposition.
SVM 3000: Stabinger Viscometer
The SVM 3000 works according to a new, patented (EP 0 926 481 A2) measuring principle. Just fill the measuring cell with 3 ml of sample and obtain both dynamic and kinematic viscosity and density values. The viscosity index calculation is also integrated.
DMA 4100/4500/5000 M
The DMA 4500 M provides unparalleled ease of use and complete transparency and traceability of the sample filling and measurement process. You can be sure that your sample filling and measurement are being performed correctly and have complete confidence in the outstanding quality of your results.
Abbemat Refractometer Series
Anton Paar offers a range of Abbemat refractometers which embody four decades of technical know-how.
MCR 702 TwinDrive™ Rheometer
Anton Paar introduces a groundbreaking high-end rheometer in a class of its own: MCR 702 TwinDrive™. For the first time ever in the history of rheometry, rheological tests can be performed with two torque transducers and drive units at once: Two powerful EC motor units in a combined modular setup – flexible and precise enough to deliver any result users are looking for.
Penetration & Texture Testing
The Penetration is used to measure the resistance which a material under specified test conditions provides against being pierced by a specifically shaped penetrator.
Lovis 2000 M/ME Microviscometer
Lovis 2000 M/ME is a rolling-ball viscometer which measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle.
The Xsample Series
The Xsamples 22, 122, 52, 352, 452, 352 H and 452 H have been designed especially for the sample handling of Generation M master instruments and their broad range of applications.
Ultra Nanoindentation Tester (UNHT)
The UNHT, ultra-high resolution nanoindenter, is used to examine the mechanical properties of a material at the nanoscale. The UNHT virtually eliminates the effect of thermal drift and compliance due to its unique patented active surface referencing system. Therefore, it is perfectly suited for long-term measurements on all types of materials, including polymers, very thin layers and soft tissues.
Reflectance Colorimeter: Sucroflex
The Sucroflex reflactence colorimeter is used for the color classification of white sugar as the most eye-catching quality factor of sugar is its color, which may vary from brilliant white to yellow-brownish tones. ICUMSA, the International Commission for Uniform Methods of Sugar Analysis, has defined a color type scale for color grading of white sugars. It covers a range from 0 to 6, whereby 0 corresponds to a sugar of maximum whiteness, while 6 indicates a highly colored low-grade white sugar.
Microwave Reaction System: Multiwave PRO
The Multiwave PRO microwave reaction system delivers the sample preparation solutions you need to obtain excellent trace analysis results, even with complicated, demanding samples.
Automatic Dilution And Dosage System: DDS
The automatic dilution and dosage system automates the routine preparation of sample dilution at accurate weight/weight or weight/volume ratios. Manual sample dilution and dosage methods are time-consuming and error-prone.
MCP 200/250/300/500 Sucromat Automatic Saccharimeter
MCP 200/250/300/500 Sucromat is an automatic saccharimeterfor the highly accurate analysis of products in the sugar industry. The values are given in °Z (International Sugar Scale). While MCP 200/300 Sucromat measures at 589 nm, MCP 250/500 Sucromat measures at two wavelengths: 589 nm (VIS) and 880 nm (NIR). Using the NIR wavelength 880 nm allows analysis of strongly colored filtrates which cannot be measured at 589nm. The modular design allows costumer-specific configurations and future upgrades. Over 30 years of experience and highest quality in development, production and customer support has made Anton Paar saccharimeters the standard in sugar analysis.
RheolabQC
RheolabQC is a rotational rheometer based on state-of-the-art technologies also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design.
Powder Cell
The new Powder Cell from Anton Paar for the renowned MCR rheometer series brings the full array of traditional rheological methods to the field of powder. Now it is possible to simulate and determine powder flow under different conditions. This is important in the field of quality control, but also to investigate dry granular flow, especially in the fluidized or near-fluidized state. An MCR rheometer plus Powder Cell is the perfect combination for true rheological investigations of powders in quality control as well as research and development.
Abbemat Heavy Duty Refractometers
Technology leader Anton Paar launches two new high-performance refractometers: Abbemat 450 and 650. The instruments combine extraordinary robustness with high precision up to ±0.00002 nD to measure the refractive index under harsh conditions.