Product/Service

XE3 CombiChecker (Metal Detector + Checkweigher)

Source: Mettler-Toledo Product Inspection

XE3CombiChecker_image

The XE3 CombiChecker is a very compact in-line checkweigher and metal detection combination system incorporating not only all features, options and accessories of the standard XE3 checkweigher, but also including a highly sensitive metal detector.

Request Information

The XE3 CombiChecker is a very compact in-line checkweigher and metal detection combination system incorporating not only all features, options and accessories of the standard XE3 checkweigher, but also including a highly sensitive metal detector. The combination of these two technologies with a single touchscreen user interface makes this unit optimal for all applications that require an effective brand protection program but where floor space is at a premium.

The XE3 checkweigher is suitable for dynamically weighing products up to 6000g with an accuracy from ± 0.2g and a maximum throughput of 200 ppm.

While the checkweigher measures product weights quickly and precisely, rejecting "out of tolerance" products, the metal detector reliably detects and rejects products contaminated by metal. Common contaminants detected range from nuts and bolts, right down to small metal filings, staples, needles or pieces of wire. The rejection of "bad" products is ensured by two rejecting devices – a system which allows separate rejection of metal-contaminated and off-weight products.

The modular concept has been designed to allow the inclusion of a very large range of options and accessories and readily enable customization for your specific application requirements.

The XE3 checkweigher has a particularly compact design and small footprint. This makes it perfect for applications where factory floor space is at a premium and allows simple integration into your existing production line.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information

Mettler-Toledo Product Inspection