Pharmaceutical Heat Exchangers

Click Here To Download:
•Brochure: Shell and Tube Heat Exchangers
•Request For Quote Spreadsheet: Shell and Tube Heat Exchangers

Just a few of the standard benefits performed by our expert heat exchanger design team include:

• Straight-tube or U-tube designs
• 100% vibrational and acoustic resonance analysis
• All multi-pass exchangers, straight-tube or U-tube, include accurate counter-current and co-current flow analysis
• The U-bend area of U-tube exchangers is not included in the heat transfer calculations or effective area
• Precise expansion and contraction calculations are performed on all straight-tube exchangers to determine expansion joint necessity. (Expansion joints are not needed for U-tube designs)
• Reynolds Numbers are reported with each design to report the efficiency of the design
• Carefully calculated baffle-spacing, baffle-number, baffle-cut and baffle inlet/outlet locations
• Precise tubeside and shellside pressure drop calculations are reported with every design (Based on your allowable pressure drop)
• Precise tubeside and shellside velocity calculations are reported with every design (Utilizing industry accepted minimum values)
• TEMA recommended fouling factors used in every design
• Excess surface area is added to every design
  • Ensures exchanger will operate as efficiently tomorrow as it does today
• In the rare event of a ruptured tube, ABC can use a sanitary plug to seal-off the tube

Our highly skilled craftsmen operate state-of-the-art machinery and equipment to custom fabricate the highest quality, sanitary shell and tube heat exchangers available. Just some of our standard manufacturing features included with every heat exchanger:

• Custom designed, state-of-the-art hydraulic tube expansion – no work hardening, scoring, thinning or scarring of the product contact surfaces
• Custom designed, state-of-the-art orbital tube welders for tube-to-tubesheet seal welds
• Proprietary tube-bending apparatus for U-tube designs ensures product contact surface finish adherence in the U-bend area
• All heat exchangers with surface finishes of 0.6-µm to 0.3-µm include electronics-grade seamless tubing
  • Sanitary welded tubing is available for surface finishes of greater than 0.75-µm
• 100% ASME BPE 2005 compliant U-tube and straight-tube designs
• Stringent QA/QC procedures
• Unsurpassed document control department to ensure receipt of all necessary validation documentation
• 100% success rate for FDA Validation Protocol for over forty (40) years

Click Here To Download:
•Brochure: Shell and Tube Heat Exchangers
•Request For Quote Spreadsheet: Shell and Tube Heat Exchangers