Datasheet | June 1, 2012
Spectrodensitometers: FD-7 Datasheet
Source: Konica Minolta Sensing Americas, Inc.
PRODUCT SPECS:
What are the specs for the product?
| Model | FD-7 - FD-5 |
|
Illumination/viewing
system
|
45°a: 0°(annular illumination) *1
Conforms to CIE No. 15, ISO 7724/1, DIN 5033 Teil 7, ASTM E 1164,
and JIS Z 8722 Condition a for reflectance measurements
|
|
Spectral separation
device
|
Concave grating |
| Wavelength range |
Spectral reflectance: 360 nm to 740 nm
Spectral irradiance: 360 to 730 nm
FD-5
Spectral reflectance: 360 nm to
740 nm
|
| Wavelength pitch | 10 nm |
| Half bandwidth | Approx. 10 nm |
| Measurement area | Ø3.5 mm |
| Light source | LED |
| Measurement range | Density: 0.0D to 2.5D; Reflectance: 0 to 150% |
| Short-term repeatability |
Density: σ0.01D
Colorimetric: Within σΔE00 0.05 (When white plate is measured 30
times at 10-second intervals after white calibration has been performed)
|
|
Inter-instrument
agreement
|
Within ΔE00 0.3 (Average of 12 BCRA Series II color tiles compared to values measured with a master body under Konica Minolta standard
conditions)
|
| Measurement time | Approx. 1.4 s (single-point reflectance measurement) |
| Displayed values |
Colorimetric values, color-difference
values, density values, densitydifference
values, dot area ratio, dot
gain, PASS/FAIL judgment, illuminance,
correlated color temperature
FD-5
Colorimetric values, colordifference
values, density
values, density-difference
values, dot area ratio, dot gain,
PASS/FAIL judgment
|
|
Measurement
conditions
|
Corresponding to ISO 13655 Measurement Conditions M0 (CIE
Illuminant A), M1 (CIE Illuminant D50), and M2 (illumination with UV-cut
filter); User-defined illuminant
|
| Illuminants |
A, C, D50, ID50, D65, ID65, F2, F6, F7, F8, F9, F10, F11, F12, Userdefined illuminant
|
| Observers | 2° Standard Observer, 10° Standard Observer |
| Color spaces |
L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, and color differences in these color
spaces
|
|
Color-difference
equations
|
ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter),
CMC (l: c)
|
| Indexes |
WI (ASTM E 313-96); Tint (ASTM E 313-96); ISO Brightness (ISO 2470-
1); D65 Brightness (ISO 2470-2); Fluorescence index
|
| Density | ISO Status T, ISO Status E, ISO Status A; DIN 16536 |
| Storable data | Colorimetric target data: 30 data; Density target data: 30 data |
| Display language | English, French, German, Spanish, Japanese, Chinese (Simplified) |
|
Scanning
measurements*2
|
Scanning measurement of a color chart
can be performed.
FD-5
N/A
|
| Interface | USB 2.0 |
| Output data*2 |
Displayed values; Spectral reflectance
data; Spectral irradiance data
FD-5
Displayed values
|
| Power |
Rechargeable internal lithium-ion battery (Number of measurements per
charge: Approx. 2,000 when new); AC adapter; USB power bus
|
|
Dimensions
(W × D × H)
|
70 × 165 × 83 mm (Body only);
90 × 172 × 84 mm (With target mask attached)
|
| Weight | Approx. 350 g (Body only); Approx. 430 g (With target mask attached) |
|
Operating
temperature/humidity
range
|
10 to 35°C, 30 to 85% relative humidity with no condensation |
|
Storage temperature/
humidity range
|
0 to 45°C, 0 to 85% relative humidity with no condensation |
*1 Illumination for wavelengths under 400nm is unidirectional.
*2 Available when using PC software.