Product/Service
Series 901 Rotary Turn-Tables
Source: Kamflex Corporation
These units are used for product accumulation, manual packaging and case filling applications. Typically, product is transferred from a packaging or bagging machine to this turn table via a cleated belt conveyor; operators will then pick and place the product into cases.
Kamflex Corporation are used for product accumulation, manual packaging and case filling applications. Typically, product is transferred from a packaging or bagging machine to this turn table via a cleated belt conveyor; operators will then pick and place the product into cases. The circular top is a one piece, 12-gauge 304SS disc formed by a metal spinning process. Integral flanges or a dished contour results in a more sanitary design.901 A:1.8 RPM, Friction wheel drive, constant speed
(For light product loads)
901 B:6 RPM, Direct drive, constant speed
(For heavier, uneven product loads)
901 C:1.5 - 6 RPM, Direct drive, variable speed (For heavier, uneven product loads) All 304SS construction
12-gauge, 304SS formed top, sand blast finish
2" square tubing frame polished to a No. 4 finish
Continuous TIG welds, ground & polished
Washdown duty frame is standard (washdown motor is an option)
Includes motor starter and/or SCR variable speed controller
Series 901 Turn-Tables are available in three versions, depending on the drive mechanism:
In a somewhat related design variation, 1" thick UHMW tops are available for accumulation or the unscrambling of glass or plastic bottles.
ADDITIONAL QUALITY FEATURES & BENEFITS:
<%=company%>, 555 Kimberly Drive, Carol Stream, IL 60188. Tel:800-323-2440. Fax:630-682-9312
