Product/Service
DLM Solids Flow Meter
Source: Schenck AccuRate
The deflection chute measuring system used in our DLM Solids Flow Meter is also based on reactive force but a curved guide chute is used in place of an impact plate.
Click Here To Download:
•Datasheet: DLM Solids Flow Meter
•Datasheet: DLM Solids Flow Meter
•Datasheet: DLM Solids Flow Meter
The deflection chute measuring system used in our DLM Solids Flow Meter is also based on reactive force but a curved guide chute is used in place of an impact plate. As a result, impact or shock is replaced by radial acceleration and chute deflection that a load cell detects. This signal is then electronically processed to produce flow rate and total weight values at accuracies generally better than +/- 2% and with repeatability of 0.5%.
- Ideal for relatively high flow rates of free-flowing or pulverized materials.
- 30 to 600 tons per hour.
- Material temperatures from 0 to 500° F (260°C).
•Datasheet: DLM Solids Flow Meter
Need More Information? Just Ask.
Click the button below to directly contact the supplier. Use it to:
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
